6
Done, and then press E.
7
Your wireless network and Internet
connection are setup and ready to use.” message appears.
Manual Network Setup (Wireless)
Offices may use static IP addresses.
Getting the Network Connection Values
1
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support
4
On the SupportDetails
displayed.
How to set up manually
1
Set Network type to Wireless from the Network Settings page.
2
The Network
3
u or d
E
Refresh to search again.
Stop
4
If the Enter password.
5
If the router has security, enter the Enter password. (Security key or PIN).
6
Done, and then press E.
7
Select Stop
8
Select IP SettingsIP Settings screen appears.
9
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat
the entry process for each field in the IP Address.
Setting IP Settings to Enter manually automatically changes DNS Setting to Enter
manually.
To Next Page
Loading...
