To Next Page
L
Lisa SimsSep 6, 2025
Why the screen ratio cannot be changed on Samsung DVD Player?
- SSara BernardSep 6, 2025
The screen ratio on your Samsung DVD Player is fixed on some DVDs.
Why the screen ratio cannot be changed on Samsung DVD Player?
The screen ratio on your Samsung DVD Player is fixed on some DVDs.
Why is there no HDMI output from my Samsung DVD player?
If you're getting no HDMI output from your Samsung DVD player, first check that the video output is HDMI enabled. Then, verify the connection between your TV and the HDMI jack on the DVD player. Finally, confirm that your TV supports the DVD player's resolution (480p/576p/720p/1080i).
How to get 5.1 channel sound on Samsung DVD Player?
5.1 channel sound on your Samsung DVD player will only work if: your DVD player is connected to the correct amplifier, the disc has 5.1 channel sound, your audio system is properly connected and working, and the Audio Output in the SETUP Menu is set to Bitstream. Also, check the disc for the '5.1 ch' mark.
What to do if the picture from Samsung DVD-HD870 is noisy or distorted?
If the picture from your Samsung DVD Player is noisy or distorted, make sure the disc is clean and free of scratches. If not, clean the disc.
What does it mean if there is abnormal HDMI output screen on Samsung DVD-HD870 DVD Player?
If snow noise appears on the screen when using HDMI output on your Samsung DVD Player, it means that your TV does not support HDCP (High-bandwidth Digital Content Protection).
What causes HDMI output Jitter on Samsung DVD-HD870?
HDMI output jitter on your Samsung DVD Player can occur if your TV system setup is incorrect or when the frame rate is converted from 50Hz to 60Hz for 720P/1080i HDMI Output. Check your TV system setup. You may also need to refer to your TV's user manual.
General| Progressive scan output | Yes |
|---|---|
| Audio formats supported | MP3, WMA |
| Device type | DVD player |
| Product color | Black |
| Composite video out | 1 |
| Dimensions (WxDxH) | 430 x 210 x 43 mm |
