Samsung GX-20 - Uniformity CS: Adjustment to Make the Outputs of each AF Sensor Uniform

119
- This Document can not be used without Samsung's authorization -

. ADJUSTMENT
11. Uniformity CS : Adjustment to make the outputs of each AF sensor uniform.
The outputs of each AF sensor are not uniform. This is an adjustment process to improve the
performance of the AF sensor by making the outputs uniform.
Adjust the AF sensor when the AF sensor has been replaced or when it is faulty.
1. Adjustment procedure
✁
Install a Macro 50mm F2.8 lens to the camera. (Set the focus mode to MF, infinitive.)
✂
Connect the camera to the EV tester. (Install a 50m lens.)