Samsung GX-20 - Disassembling Process for Camera Body

150
- This Document can not be used without Samsung's authorization -

. SERVICE INFORMATION
✁
Preparation : Remove the parts from the body of the camera (hot shoe cover, eyepiece, contact cover, etc.)
Caution
Do not leave screws, steel balls or magnetic cards near the OIS block because there is a strong
magnet in the OIS block when the cover is open.
✂
Five screws
✄
Eight screws
☎
A401•Battery cover
2. Disassembling Process For Camera Body
1> A401 (Bottom Cover)