Samsung GX-20 - OPS Gain Adjustment

82
- This Document can not be used without Samsung's authorization -

. ADJUSTMENT
5. OPS gain adjustment
Preparation Equipment :
✁
SR gain adjustment program (SR_GainForCS) for the GX-20
✁
SR gain adjustment device for the GX10 (driving stage•controller•speed meter)
✁
SR gain adjustment chart for GX10 (identical to the GX10)
✁
PC (Windows XP (SP2), USB port standard device)
✁
D-XENON 50-200 mm lens
✁
USB cable
✁
AC adapter (or DC code for 76830)
1. Computer set-up
✂✄
NetFramework2.0
☎
and
✄
Visual C++Runtime2005
☎
must be installed on the PC already.
✆
The 77010
✄
SR_GainForCS
☎
folder must be copied onto the hard disk.
IMPORTANT
✝
CAUTION 1
✞
This adjustment must be performed when replacing the T100 main circuit board, the
T640 relay board or the T970 circuit board.
✝
CAUTION 2
✞
This adjustment must be performed after the OPS adjustment (unit adjustment).
✝
CAUTION 3
✞
The adjustment must be performed on a rigid, stable and even area without vibration.
✝
CAUTION 4
✞
Handle the adjustment stage carefully, as it is heavy.
Do not touch the black vibration plate.