14 - This Document can not be used without Samsung's authorization -
.
SPECIFICATION
7. Attaching and removing the lens
1. Check that the camera is off.
2. Remove the body mount cover (
✁
) and lens
mount cover (
✂
). Be sure to put the lens down
with the lens mount side facing upward to avoid
damage.
3. Align the red dots on the camera and the lens,
and secure by turning the lens clockwise until it
clicks. After attaching, check that the lens is
secure. Also check that the red dots of the lens
are on top and the attached portion does not
move sideways.
✄
Some functions are restricted when lenses are not set to Aperture A (Auto).
To allow shutter release, set [Use Aperture Ring] in [CUSTOM2 MENU] menu.
☎
Turn the camera off before attaching or removing the lens to prevent unexpected lens problems.
To Next Page
Loading...
