59
- This Document can not be used without Samsung's authorization -
. FIRMWARE
2. Insert a fully charged battery into the camera (AC adapter connection is recommended for safety.).
3. Insert an SD card for firmware into the camera.
1. Download the latest firmware file and save it into
the ROOT. (An MMC card can't be used for the
firmware upgrade.)
Check that the name of the firmware file is
"FWGX20B.BIN".
3. Firmware Upgrade Procedure
Caution
If the battery goes flat during the upgrade, the camera will be damaged.
Two types of power modes therefore need to be used for safety purposes.
To Next Page
Loading...
