Samsung GX-20 - Adjustments Flow Chart When Replacing the T100

77
- This Document can not be used without Samsung's authorization -

. ADJUSTMENT
3. Adjustments flow chart when replacing the T100
The sequence of adjustments items when replacing the T100 main circuit board is as follows.
✁
Note Prod. ID FW
✂
Product ID FW
✄
✁
Set the initial data
✂
Initial Data Set
✄
SR adjustment (SR unit adjustment)
✂
K20D_SR_Operation_Adjustment
✄
SR adjustment (SR gain adjustment)
✂
77010 SR_Gain For CS
✄
Digital section adjustment
✂
77010 M-Test CS
✄
WDC (Adjust the defective white pixels)
✂
77010_White Pixel Adjust
✄
Shutter speed adjustment according to the histogram
✂
K20D_PDCAdj
✄
Function test
*SR check can be skipped if SR adjustment is completed.
Initial settings
(Initialized at the factory)
✂
Initialize Set
✄
Single-lens reflex functional section adjustment
☎
K20D_PDCAdj
✆
(
✝
Data initialization is unavailable)
✂
K20D_Uniformity_CS
✄
✂
K20D_FI_CS
✄