132
- This Document can not be used without Samsung's authorization -
. ADJUSTMENT
15. WDC adjustment
✁
Defective white pixels adjustment (light source•reference lens are not needed.)
✂
Adjusting a few times may fix the bad pixels.
Camera set-up : Mode dial M, focus lever MF, lens removal, memory removal.
1. Adjustment procedure
✄
Connect the AD adapter to the body of the camera.
☎
Connect the USB cable from the body of the camera to the PC.
✆
Turn on the camera and check that the PC recognizes the camera.
✝
Start the adjustment program (77010_WhitePixelAdjust.exe).
✞
Click on the "START" button in the adjustment program, or hit the "Enter" key on the keyboard.
✟
If all the adjustments are completed, then the "OK" message appears.
✠
Click on the [X] button (or [END] button) and end the adjustment program.
(Adjustment time: approx. 70secs).
To Next Page
Loading...
