157
- This Document can not be used without Samsung's authorization -
. SERVICE INFORMATION
4> 0-T100 (Main Circuit Block)
✁
Three BTs (6 x 15)
✂
U8 (BT 3.8 x 10)
✄
Twenty-one lead wires
☎
Remove the PCB from the connector (2ea, flip type).
✆
Remove the PCB from the connector (4ea, plug type)
Caution
Don't apply excessive pressure on the PCB of the CCD block as this may affect its performance.
Ensure that the PCB is not bent.
To Next Page
Loading...
