15- This Document can not be used without Samsung's authorization -
. SPECIFICATION
4. Remove the front lens cap by pushing the
indicated portions inward.
5. To detach the lens, hold down the lens unlock
button (
✁
) and turn the lens counterclockwise.
✂
The body mount cover (®Á) is a cover to prevent damage during shipping.
✂
The camera body and lens mount incorporate lens information contacts and an AF coupler.
Dirt, dust, or corrosion may damage the electrical system.
Clean the contacts with a soft dry cloth.
Attaching and removing the lens must be done in a clean place.
Please avoid contact with liquid water. If the camera°Øs body or the lens gets wet or dirty, camera
malfunction may occur.
To Next Page
Loading...
