79
- This Document can not be used without Samsung's authorization -
. ADJUSTMENT
✁
Put the body on a stable support (table) downwards.
✂
Check the CCD ID no. when replacing the T100 circuit board.
3. Adjustment procedure
✄
Start the PC.
☎
Connect the body to the PC using the USB cable and connect the AC adapter to the body. (power ON)
✁
Check that the hot plug icon display is recognized on the PC.
✂
Double click on the
✆
K20D SR Operation.exe
✝
file in the adjustment software folder and execute it.
✞
The adjustment screen appears.
✟
Click on the [Start] button.
To Next Page
Loading...
