130
- This Document can not be used without Samsung's authorization -
. ADJUSTMENT
3. Adjustment procedure
✁
Connect the USB cable from the camera to the PC, and turn on the camera.
✂
Double click on the "77010_M-Test_CS_Ver_.exe" file in the
✄
77010-M-Test CS
☎
folder.
✆
Enter the lens ID no. and click on “OK” on the lens input screen. (e.g.:123)
✝
Click on “Yes (Y)” if the lens no. is entered correctly.
✞
Hit the "Enter" key (or click on the "START" button) and start the adjustment.
(Start the adjustment according to the instructions.)
To Next Page
Loading...
