192
- This Document can not be used without Samsung's authorization -
. SERVICE INFORMATION
11> 0-T970 (SD circuit block)
✁
T640 … Connect the connector evenly. (Plug type)
✂
Attach the T98 onto the T100 land area as shown in the figure.
✄ ☎
Do not put excessive pressure on the PCB with the image sensing device, as it may affect the
performance.
✆
Position the T100 as
shown in the figure.
✝
Connect the flexible PCB
to the connector.
(Plug type)
✞
Connect the connector by
pushing the T100 onto the
camera body. (Plug type)
To Next Page
Loading...
