84
- This Document can not be used without Samsung's authorization -
. ADJUSTMENT
✁
Mount the lens on the body of the camera.
✂
Set the body as below.
• Mode dial
✄
M
☎
• AF change lever
✄
MF
☎
• OPS switch
✄
ON
☎
✆
Mount the body of the camera onto the vibration plate.
✆
Fix the camera firmly using the two knobs.
✝
Locate the chart (
✞
) on the center of the finder. (Within the spot metering frame.)
✟
Check
✠
Check again that the distance is 2.0mm.
Turn on the controller and turn the dial up to 1,000 rpm.
Turn off the controller after checking.
To Next Page
Loading...
