93
- This Document can not be used without Samsung's authorization -
. ADJUSTMENT
✁
The following adjustment must be performed when replacing the T100 circuit board
(unnecessary to follow the following order.)
✂
See
✄
Shutter speed adjustment according to the histogram
☎
.
4. Ending procedure
✆
Click on the “Cl” icon, and disconnect the communication with the camera. (USB close)
✝
Check
✞
Check that the USB IO is displayed as
✄
Unconnect
☎
.
✟
Click on the “end” icon, and end the adjustment program.
To Next Page
Loading...
