To Next PageTo Next PageWhy is my Samsung HT-E6730W remote control not working?
If the remote control for your Samsung Home Theater System isn't working, first ensure you're within its operational range and at the correct angle to the sensor. Also, check whether the batteries are dead. Finally, make sure you've selected the correct mode (TV or BD) on the remote.
What to do if there is no picture on my TV due to HDMI output settings on my Samsung HT-E6730W?
If the HDMI output is set to a resolution that your TV doesn't support, you might not see a picture. To fix this, press and hold the '5' button on the front panel for more than 5 seconds when there is no disc in the system. This will restore all settings to the factory defaults.
How to reset the rating level password on my Samsung HT-E6730W Home Theater System?
If you've forgotten the rating level password for your Samsung Home Theater System, remove any disc from the product, then press and hold the product's 5 button for longer than 5 seconds. INIT will appear on the display, and all settings will return to the default values. Then, press the POWER button. Be aware that using the RESET function will erase all stored settings, so only use this if necessary.
Why does my iPod fail to connect to my Samsung HT-E6730W?
If the iPod fails to connect to your Samsung Home Theater System, check the condition of the iPod connector and Dock. Also, ensure that the iPod software version is up to date.
Why is Dolby Digital 7.1 CH Surround Sound not working on my Samsung Home Theater System?
Dolby Digital 7.1 CH Surround Sound will only be produced by your Samsung Home Theater System if the disc is recorded with 7.1 channel sound. Also, check if the audio language is correctly set to Dolby Digital 7.1-CH in the information display.
Why is sound only coming from a few speakers on my Samsung Home Theater System?
If you're only hearing sound from a few speakers instead of all 8 on your Samsung Home Theater System, first check if the speakers are connected correctly. Also, adjust the volume. Note that on some Blu-ray/DVD discs, sound is only output from the front speakers, and when listening to a CD, radio, or TV, sound is also output to the front speakers only.
Why is there no sound when listening to TV audio through my Samsung HT-E6730W Home Theater System?
If you're listening to TV audio through your Samsung Home Theater System and no sound is heard, it might be because the Blu-ray/DVD disc functions were activated. If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.
What to do if playback doesn't start immediately on my Samsung Home Theater System?
If playback doesn't start immediately when you press the Play/Pause button on your Samsung Home Theater System, and you are using a disc, try wiping the disc clean, as the issue might be due to a deformed or scratched disc.
Why is there no sound coming from my Samsung Home Theater System?
If you're not getting any sound from your Samsung Home Theater System, make sure the speakers are properly connected and the speaker setup is correctly customized. Also, check if the disc is severely damaged, as this can also cause sound issues. Note that the home theater does not play sound during fast playback, slow playback, and step motion playback.
General| Type | Home Theater System |
|---|---|
| Audio Channels | 7.1 |
| Total Power Output | 1330 W |
| Blu-ray Player | Yes |
| 3D Playback | Yes |
| Wi-Fi | Yes |
| HDMI Inputs | 3 |
| USB Playback | Yes |
| Smart Hub | Yes |
| Wireless Rear Speakers | Yes |
| Anynet+ (HDMI-CEC) | Yes |
| Video Upscaling | Yes |
| Optical Audio Input | Yes |
| Weight (Main Unit) | 4.1 kg |
| Audio Decoding | Dolby Digital, DTS |
| Connectivity | HDMI, USB, Optical, Wi-Fi |
| Dimensions (Main Unit) | 430 mm |
Alerts about electric shock, laser radiation, and general hazards.
Important safety instructions, precautions, and handling guidelines for unit use.
Guidelines for proper storage and handling of discs to maintain quality.
Health and safety guidance for using the 3D feature.
Legal notices including copyright and trademark information.
Lists compatible disc types and supported file formats for playback.
Information on disc region coding and supported disc logos.
Details on supported music file extensions, containers, and codecs.
Comprehensive list of supported video file extensions, codecs, resolutions, and bitrates.
Guidelines for USB connectivity and information on AVCHD format playback.
List and identification of supplied accessories with part numbers.
Identification of all ports, controls, and indicators on the unit.
Detailed explanation of each button on the remote control.
Instructions for installing batteries and setting up the remote for TV control.
Guide on attaching a ferrite core to the power cord for RF interference reduction.
Guidance on optimal speaker positioning and connecting them.
Identification of speaker parts and instructions for assembling stands.
Detailed steps for connecting speaker wires and the wireless receiver module.
Instructions for connecting the FM antenna for radio reception.
Steps for connecting an iPod or iPhone via USB cable or dock.
Methods for connecting the unit to a television via HDMI or Video cable.
Steps for connecting external audio/video components via HDMI, Optical, or AUX.
Instructions for establishing wired and wireless network connections.
Step-by-step guide for initial setup, language, and network configuration.
Procedures for entering network security keys and managing software updates.
Options for adjusting the display's aspect ratio for optimal viewing.
Guide for automatic sound calibration and navigating the Home screen.
How to enter and navigate the product's detailed settings menu.
Detailed options for 3D, Aspect Ratio, BD Wise, Resolution, and Color settings.
Configuration options for speakers, equalizer, volume, and audio return channel.
Settings for network status, Wi-Fi Direct, Soft AP, and AllShare.
Options for initial settings, device management, and language preferences.
Settings for parental controls, display, time zone, software updates, and support.
Comprehensive guide for performing automatic sound calibration.
Steps to configure wired and wireless network connections for internet access.
Manual steps to configure a wired network connection with static IP.
Overview of different methods for setting up a wireless network connection.
Guide for automatic wireless network connection using SSID and password.
Manual steps to configure a wireless network connection with static IP.
Easy wireless setup using the WPS button on your router.
Procedures for connecting devices directly using Wi-Fi Direct.
Details on connecting via Wi-Fi device, PBC, or PIN.
Using Soft AP for network sharing and managing AllShare devices.
Instructions for upgrading product software via online or USB methods.
Alternative methods for upgrading software using discs, downloaded files, or standby mode.
Overview of the AllShare Play interface and how to play content from My List.
Steps for playing various types of media content from connected sources.
Guide to playing media files from USB storage devices and iPod/iPhone.
List of iPod and iPhone models compatible with the product.
Selecting input sources and instructions for playing commercial audio and video discs.
Playing custom discs and using the AllShare network function.
Steps to download and install the necessary AllShare software on your PC.
Playing media files located on a PC or DLNA device.
Using a smartphone to control playback of PC-hosted media.
Detailed controls for video playback operations like play, pause, repeat, and slow motion.
Accessing and utilizing the TOOLS menu for playback options.
Functions for controlling music playback, including shuffle, playlists, and repeat.
Instructions for ripping music to USB and controlling photo playback.
Options within the Tools menu for sorting and playing various media files.
Options for sending files, managing playlists, and playing groups of content.
Instructions for tuning radio stations and applying sound effects.
Details on Dolby Pro Logic II, SFE Mode, and 3D sound adjustments.
Introduction to the Smart Hub interface, its features, and applications.
Accessing and navigating the internet using the built-in web browser.
Information on using BD-LIVE for online movie content and Disc to Digital for cloud access.
Important notes regarding HDMI, 3D, aspect ratio, BD Wise, and digital output.
In-depth explanations of various settings like Anynet+, speaker setup, and HDMI audio.
Details on playing video files, selecting languages, and using the Tools menu for pictures.
Playing music/movies from iPod/iPhone and listing compatible models.
Tables detailing output resolutions based on content type and connection.
Comprehensive table for selecting digital audio output settings.
Solutions for common problems like disc ejection, iPod connection, and playback errors.
Troubleshooting for menu display, aspect ratio, product not working, and HDMI issues.
Troubleshooting for network services and information on product repairs.
Technical specifications covering power, dimensions, disc types, audio, and amplifier details.
Detailed specifications for the 7.1ch speaker system and the SWA-5000 module.
