12
INSTALLING THE SPEAKERS ON THE STANDING TABLE
You can use the standing table to install this unit on a shelf. Make sure you place the unit on a flat surface.
connections
Connecting
• To secure the MAIN SET with Standing Table, follow instructions below in order to assemble it.
1. Assemble the MAIN SET A and B.
2. Attach C, D to the rear side of connected A and B.
Check the screw holes in the rear of the MAIN SET
before tightening screw E.
▪ Check whether it is installed on a flat and stable position, not to fall. If the unit falls off, it
may cause an injury or damage to the product.
A
MAIN SET (RIGHT)
B
SPEAKER (LEFT)
C
BRACKET-BRIDGE
D
ASSYSTAND P-DESK
E
SCREW
E
D
C
B
A
To Next Page
Loading...
