27
ENG
● FUNCTIONS
▪ Insert a USB drive containing the firmware upgrade into the USB port on the back of the subwoofer.
▪ Please be careful to not disconnect the power or remove the USB drive while upgrades are being
applied. The main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪ If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
▪ For upgrading purposes, do not format USB drive in NTFS format because it is not a supported file system.
▪ Depending on the manufacturer, the USB may not be supported.
SOFTWARE UPGRADE
Samsung may offer upgrades for the Crystal Surround Air Track's system
firmware in the future.
If an upgrade is offered, you can upgrade the firmware by connecting a USB
drive with the firmware upgrade stored on it to the USB port on your Air Track.
Note that if there are multiple upgrade files, you must load them onto the USB drive
singly and use them to upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung call center to receive more
information about downloading upgrades files.
POWER
TV POWER
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE
SOUND SPEAKER
DIMMER
AUTO POWER
TV INFOTV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH
TV EXIT
DRCREPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE
SPEAKER button
This button enables you to select between listening to audio from your
TV or audio from the Air Track when connected via HDMI.
Press SPEAKER on the remote control of this unit.
AUDIO MODE SPEAKER Scroll Display Display
HDMI IN
TV
TV SPEAKER TV SPK
A
ir
T
rack
AVR SPEAKER HDMI 1,2
ARC
TV
TV SPEAKER S MUTE
A
ir
T
rack
AVR SPEAKER TV ARC
Using the TV functions
1.
Press TV SOURCE on the remote control of AirTrack.
2.
Press TV INFO on the remote control to display the TV channel
information.
3.
Press TV CH on the remote control to select the TV channel.
4.
Press TV VOL on the remote control to increase or decrease the volume
level.
5.
Use
TV PRE-CH button to move to the previous TV channel in TV
mode.
6.
To exit the TV menu, use the
TV EXIT button. (Functions same as the
EXIT button of the TV remote control)
▪ The remote control can operate TVs made by SAMSUNG only.
POWER
TV POWER
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE
SOUND SPEAKER
DIMMER
AUTO POWER
TV INFOTV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH
TV EXIT
DRCREPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE
To Next Page
Loading...
