Why does my Samsung Vacuum Cleaner Jet Bot turn to avoid obstacles that aren't there?
If your Samsung Vacuum Cleaner Jet Bot does not drive straight but turns to avoid an obstacle that is not there, 3D sensor calibration is required. Please refer to the calibration procedures in the SmartThings App. If the problem persists after following the calibration procedures, contact a Samsung service center.
Why can't my Samsung Jet Bot VR50T95 Jet Bot find the Clean Station?
If your Samsung Jet Bot cannot find the Clean Station, check if there's a power failure or if the power plug is unplugged. Ensure that there are no obstacles around the Clean Station that might be preventing the Jet Bot from returning. Also, check the charging terminals for any foreign matter and clean them if necessary.
What to do if Samsung Vacuum Cleaner Jet Bot has stopped during cleaning?
If your Samsung Vacuum Cleaner Jet Bot stops during cleaning, it could be due to several reasons. If the Status Indicator turns red, manually place the Jet Bot on the Clean Station to charge it. The robot might be stuck on an obstacle like a cord, threshold or raised spot. Pick it up and move it away from the obstacle. Also, if any fabric or string is caught in a Driving Wheel, turn off the power switch and remove it. Finally, check whether the No-go Zones are set correctly.
Why Corner Clean function does not work on Samsung Jet Bot VR50T95 Vacuum Cleaner Jet Bot?
The Corner Clean function on your Samsung Jet Bot Vacuum Cleaner may not work when the Jet Bot cannot recognize the wall.
What to do if my Samsung Vacuum Cleaner Jet Bot has stopped during cleaning?
If your Samsung Jet Bot vacuum cleaner stops during cleaning, try these steps: First, place the Jet Bot manually on the Clean Station to charge it if the Status Indicator turns red and stays red. If the Jet Bot is stuck on an obstacle, pick it up and move it. Also, check the Driving Wheels for any fabric or string; if found, turn off the power and remove it. Finally, ensure that the No-go Zones are properly set.
Why Empty Dust function does not work on my Samsung Jet Bot VR50T95 Vacuum Cleaner Jet Bot?
If the Empty Dust function on your Samsung Jet Bot Vacuum Cleaner is not working, ensure that the Jet Bot is sufficiently charged. Also, check whether the Clean Station's cover is open or if the Dust Bag is full. You can check the time to empty the Dustbin in the SmartThings App. If the Empty Dust function still does not work properly, press the button on the body of the Jet Bot while it is charging to empty the Dustbin manually. Note that pressing the button during dust emptying will stop the process.
How to fix Samsung Vacuum Cleaner Jet Bot that suddenly cleans diagonally?
If your Samsung Jet Bot Vacuum Cleaner suddenly cleans diagonally, check if the Clean Station is installed along the grain of wooden floors or tiles. The Jet Bot may clean in a diagonal direction if it is moving to another area using the shortest route. It may also move diagonally if it did not make contact with an obstacle at a right angle.
Why Samsung Jet Bot VR50T95 Jet Bot is not working at all?
If your Samsung Jet Bot Vacuum Cleaner is not working, first check if the power switch is on and if the Status Indicator is on. Also, ensure the Jet Bot's battery is not depleted. If the Status Indicator is red, place the Jet Bot manually on the Clean Station to charge it. When charging is partially complete (about 10-20 minutes later), the Status Indicator should turn on and the buttons should work again.
Why is the suction power weak on my Samsung Jet Bot VR50T95 Vacuum Cleaner?
If the suction power of your Samsung Vacuum Cleaner Jet Bot is weak, it could be due to a full dustbin. Turn off the power switch and empty the Dustbin. Alternatively, the brush at the bottom of the Jet Bot might be blocked by foreign matter. Turn off the power switch and remove any obstructions. Increased noise can also indicate a full dustbin, so turn off the power switch and empty it.
Why did my Samsung Jet Bot VR50T95 Vacuum Cleaner Jet Bot stop during cleaning?
If your Samsung Vacuum Cleaner Jet Bot has stopped during cleaning, it might be due to a depleted battery. When the Status Indicator turns red and stays red, manually place the Jet Bot on the Clean Station to charge it. Alternatively, the Jet Bot may be immobilized by an obstacle such as a cord, so pick it up and move it away. Also, if any fabric or string is caught in a Driving Wheel, turn off the power switch and remove it before using the device again. Finally, make sure that No-go Zones are not set.
General| Type | Robot Vacuum Cleaner |
|---|---|
| Model | VR50T95 |
| Suction Power | 30W |
| Dust Capacity | 0.3 L |
| Battery Type | Lithium-ion |
| Battery Life | 90 min |
| Charging Time | 240 min |
| Connectivity | Wi-Fi |
| Point Cleaning | Yes |
| Edge Cleaning | Yes |
| Smart Control | Yes |
| Auto-Empty Dock | No |
| Auto Charging | Yes |
| Virtual Barrier | Yes |
| Wet Mopping | No |
| App Compatibility | SmartThings |
| Voice Control | Yes (Bixby, Alexa, Google Assistant) |
Provides essential safety guidelines and warnings before operating the appliance.
Explains the meaning of warning and caution symbols used in the manual.
Details the meaning of other symbols, such as 'NOTE', used for additional information.
Covers general safety precautions and usage guidelines for the Jet Bot.
Safety precautions specific to the Clean Station, including handling and placement.
Safety precautions for operating the Jet Bot, including what not to pick up and where not to use it.
Important safety warnings and precautions related to the power cord and electrical connections.
Essential checks and precautions to take before operating the Jet Bot for the first time.
Guidelines and warnings for using the Jet Bot during operation, including potential issues and precautions.
Detailed instructions and safety precautions for cleaning and maintaining the Jet Bot and its components.
Details the FCC rules and conditions for compliance, including interference statements.
Information regarding Industry Canada compliance, including technical specifications and radiation exposure.
Information about the open source software used in the product and where to find license details.
Step-by-step guide for correctly installing the Clean Station, including placement and power connection.
Instructions on how to charge the Jet Bot, including initial setup and checking charging status.
Explains how the Jet Bot automatically returns to the Clean Station for charging.
Details how to manually return the Jet Bot to the Clean Station for recharging.
Procedure for manually placing a discharged Jet Bot onto the Clean Station to recharge.
Troubleshooting steps to resolve issues when the Jet Bot fails to dock or recharge correctly.
Covers the fundamental operations: powering on/off, starting and stopping cleaning.
How to set the Jet Bot to sleep mode and how to cancel it.
Explanation of the LED status indicators for the Jet Bot and Clean Station and their meanings.
Describes different cleaning modes and how to set the cleaning mode for optimal results.
How to select suction power levels (Max, Smart, Normal) for cleaning.
Details on Repeat Clean, Empty Dust, Corner Clean, and Intelligent Power Control.
How to use energy-saving mode and set downtime for the Jet Bot.
Enables setting a specific time for cleaning and defining areas the Jet Bot should avoid.
Guide on how to attach boundary markers to prevent the Jet Bot from entering specific areas.
Illustrates and labels the various parts of the Jet Bot and the Clean Station.
Step-by-step guide for removing, emptying, and cleaning the dustbin and its filters.
Procedure for cleaning the driving wheels of the Jet Bot to remove foreign matter.
Detailed steps for removing, cleaning, and reattaching the main brush of the Jet Bot.
Instructions on how to clean the various sensor windows on the Jet Bot for optimal performance.
Guide on how to clean or replace the fine dust filter.
Step-by-step process for replacing the dust bag in the Clean Station.
Instructions on how to clean the fine dust filter of the Clean Station.
Guidelines for configuring your wireless router to ensure compatibility with the Jet Bot and SmartThings App.
Steps for downloading and installing the SmartThings App on your mobile device.
How to create or sign in to a SAMSUNG account required for using the SmartThings App.
Process for connecting your Jet Bot to the SmartThings App and your smartphone.
Information on how the Jet Bot's software is updated automatically and how to identify update status.
Features for monitoring cleaning results, histories, and using the home monitoring camera.
Functions for controlling the Jet Bot, including dock, pause, cleaning modes, suction, and cleaning functions.
Customization options for sound, language, volume, obstacle detection, and downtime.
Features for editing, managing, and resetting the created cleaning maps and furniture recognition.
Key notes and precautions for installing the Clean Station and Jet Bot.
Important notes and troubleshooting tips for charging the Jet Bot, especially during auto charging.
Notes and cautions for using the Jet Bot, including potential issues with thresholds, dark areas, and cleaning effectiveness.
Detailed notes and cautions for cleaning and maintaining the Jet Bot, filters, and dustbin.
Important guidelines and precautions for using, storing, and handling the Jet Bot's battery.
Troubleshooting guide to identify and resolve common issues before contacting support.
Steps to diagnose and fix issues when the Jet Bot is not working or stops mid-cleaning.
Troubleshooting for reduced suction power and issues with the Jet Bot finding its charging station.
Checks for proper attachment and placement of boundary markers.
Resolving issues with diagonal cleaning, missed spots, room finding, and map accuracy.
Troubleshooting for the automatic dust emptying function not performing as expected.
Ensuring No-go Zones work and troubleshooting Intelligent Power Control and Corner Clean.
Troubleshooting App installation and connection issues between Jet Bot and smartphone.
Resolving issues with SAMSUNG account login and product registration with wireless routers.
Steps to check and resolve Wi-Fi connection issues and smartphone responsiveness.
Resolving 'Offline' status messages and map saving issues in the SmartThings App.
Addressing delays in response when controlling the Jet Bot via a smartphone.
Information regarding open source software used in the product and how to access source code.
Instructions for resetting the Jet Bot to its original factory default settings.
Detailed technical specifications for the VR50T95**** series Jet Bot, including dimensions and performance.
Technical specifications for the Clean Station, including dimensions, power, and operating time.
To Next Page