Samsung Jet Bot VR50T95 Series User Manual (English)

Questions and Answers:

P
Philip AndersenAug 30, 2025
Why has my Samsung Jet Bot VR50T95 Jet Bot stopped during cleaning?
- A
  Andrea DavisAug 30, 2025
  If your Samsung Vacuum Cleaner Jet Bot stops during cleaning, it could be due to several reasons. If the Status Indicator turns red, place the Jet Bot manually on the Clean Station to charge. The Jet Bot may be immobilized by an obstacle; if so, pick it up and move it away. Also, check the driving wheels for any caught fabric or string; if found, turn off the power switch and remove them before restarting. Finally, check whether the No-go Zones are set.
M
matthew22Aug 29, 2025
What to do if my Samsung Vacuum Cleaner Jet Bot is not working at all?
- K
  Kelly WebsterAug 29, 2025
  First, ensure the power switch is turned on and the Status Indicator is lit. If the Status Indicator turns red and stays red, manually place the Samsung Jet Bot on the Clean Station to charge it. When you manually charge the Jet Bot due to complete discharge of its battery, the buttons on the Jet Bot do not work. When charging is partially complete (about 10-20 minutes later), the Status Indicator is on and the buttons work again. Also, check if the Jet Bot's battery is depleted.
S
Stephanie PatelAug 28, 2025
What does it mean if I get a product registration failure message for my Samsung Vacuum Cleaner Jet Bot?
- B
  Brandi SuttonAug 28, 2025
  If a message indicating product registration failure appears, try the registration procedure again, following the on-screen pop-up messages. Refer to 'Setting up the wireless router' and 'Adding a device to the SmartThings App' in the user manual for guidance. If it repeatedly fails, restart the SmartThings App and retry. Ensure all users utilize the SAMSUNG account issued by the country where the product was launched.
J
Jessica BrownAug 27, 2025
Why isn't the Intelligent Power Control function working on my Samsung Jet Bot VR50T95 Vacuum Cleaner Jet Bot?
- A
  Alan WilliamsAug 27, 2025
  If the Intelligent Power Control function on your Samsung Jet Bot isn't working, it might be because the Jet Bot is cleaning a carpet with short fibers and a bright color. In such cases, the Jet Bot may misinterpret the carpet as a floor, causing the function to not activate.
S
stephanie62Aug 27, 2025
Why does the Empty Dust function not work on my Samsung Jet Bot VR50T95 Jet Bot?
- M
  Michael MosesAug 27, 2025
  If the Empty Dust function on your Samsung Jet Bot isn't working, ensure the Jet Bot is sufficiently charged. Then, check if the Clean Station's cover is open or if the Dust Bag is full. Also, verify the 'time to empty Dustbin' setting in the SmartThings App. If problems persist, manually empty the Dustbin by pressing the button on the Jet Bot while it's charging. Note that pressing this button during dust emptying will stop the process.
B
bridgesgabrielAug 26, 2025
How to troubleshoot a Samsung Vacuum Cleaner Jet Bot that is not working?
- J
  Jacob HernandezAug 27, 2025
  If your Samsung Vacuum Cleaner Jet Bot is not working, first, check if the power switch is turned on and if the Status Indicator is lit. Ensure that the Jet Bot's battery isn't depleted. If the Status Indicator is red, manually place the Jet Bot on the Clean Station to charge. Note that when manually charging from a completely discharged state, the buttons may not work until it has partially charged (about 10-20 minutes), after which the Status Indicator will turn on and the buttons will function again.
D
David FisherAug 25, 2025
Why is the suction power weak on my Samsung Jet Bot VR50T95 Jet Bot?
- B
  Benjamin McbrideAug 26, 2025
  If the suction power of your Samsung Vacuum Cleaner Jet Bot is weak, start by turning off the power switch and emptying the Dustbin, as it might be full. Next, check the brush at the bottom of the Jet Bot for any obstructions and remove any foreign matter. Also, if you suddenly notice an increase in noise, turn off the power switch and empty the Dustbin.
G
gina82Aug 25, 2025
How to fix Samsung Jet Bot VR50T95 Vacuum Cleaner Jet Bot not working?
- S
  Steven WilliamsAug 25, 2025
  If your Samsung Vacuum Cleaner Jet Bot is not working, first ensure the power switch is turned on and that the Status Indicator is also on. Check if the battery is depleted. If the Status Indicator is red, manually place the Jet Bot on the Clean Station to charge it. After about 10-20 minutes of charging, the Status Indicator should turn on, and the buttons should function again.

Samsung Jet Bot VR50T95 Series Specifications

General

Type	Robot Vacuum Cleaner
Model	VR50T95
Suction Power	30W
Dust Capacity	0.3 L
Battery Type	Lithium-ion
Battery Life	90 min
Charging Time	240 min
Connectivity	Wi-Fi
Point Cleaning	Yes
Edge Cleaning	Yes
Smart Control	Yes
Auto-Empty Dock	No
Auto Charging	Yes
Virtual Barrier	Yes
Wet Mopping	No
App Compatibility	SmartThings
Voice Control	Yes (Bixby, Alexa, Google Assistant)

Summary

Accessories

Safety Information

Provides essential safety guidelines and warnings before operating the appliance.

Caution/Warning Symbols Used

Explains the meaning of warning and caution symbols used in the manual.

Other Symbols Used

Details the meaning of other symbols, such as 'NOTE', used for additional information.

General Safety Precautions

General Usage Precautions

Covers general safety precautions and usage guidelines for the Jet Bot.

Clean Station Safety and Handling

Clean Station Handling and Placement

Safety precautions specific to the Clean Station, including handling and placement.

Jet Bot Operation Safety

Jet Bot Usage Precautions

Safety precautions for operating the Jet Bot, including what not to pick up and where not to use it.

Pre-Use and Power Safety

Power Related Warnings

Important safety warnings and precautions related to the power cord and electrical connections.

Before Use Checks

Essential checks and precautions to take before operating the Jet Bot for the first time.

In-Use Safety and Precautions

In-Use Guidelines

Guidelines and warnings for using the Jet Bot during operation, including potential issues and precautions.

Cleaning and Maintenance Safety

Maintenance Precautions

Detailed instructions and safety precautions for cleaning and maintaining the Jet Bot and its components.

Regulatory Notice

FCC Compliance

Details the FCC rules and conditions for compliance, including interference statements.

IC Compliance and Notices

Information regarding Industry Canada compliance, including technical specifications and radiation exposure.

Open Source License Notice

Information about the open source software used in the product and where to find license details.

Installation

Installing a Clean Station

Step-by-step guide for correctly installing the Clean Station, including placement and power connection.

Operation

Charging the Jet Bot

Instructions on how to charge the Jet Bot, including initial setup and checking charging status.

Charging Procedures

Auto Charging

Explains how the Jet Bot automatically returns to the Clean Station for charging.

Manual Docking and Recharging

Details how to manually return the Jet Bot to the Clean Station for recharging.

Discharged Jet Bot Recharging

Procedure for manually placing a discharged Jet Bot onto the Clean Station to recharge.

Docking Troubleshooting

Checking Docking Issues

Troubleshooting steps to resolve issues when the Jet Bot fails to dock or recharge correctly.

Using the Jet Bot

Basic Operation

Covers the fundamental operations: powering on/off, starting and stopping cleaning.

Sleep Mode Management

How to set the Jet Bot to sleep mode and how to cancel it.

Operation Status Indicators

LED Status Indicator Meanings

Explanation of the LED status indicators for the Jet Bot and Clean Station and their meanings.

Cleaning Functions

Cleaning Methods and Modes

Describes different cleaning modes and how to set the cleaning mode for optimal results.

Suction Power Settings

How to select suction power levels (Max, Smart, Normal) for cleaning.

Advanced Cleaning Features

Details on Repeat Clean, Empty Dust, Corner Clean, and Intelligent Power Control.

Additional Jet Bot Functions

Energy Saving and Downtime

How to use energy-saving mode and set downtime for the Jet Bot.

Scheduling and No-Go Zones

Enables setting a specific time for cleaning and defining areas the Jet Bot should avoid.

Boundary Marker Usage

Attaching Boundary Markers

Guide on how to attach boundary markers to prevent the Jet Bot from entering specific areas.

Jet Bot Parts Diagram

Component Identification

Illustrates and labels the various parts of the Jet Bot and the Clean Station.

Maintenance Procedures

Cleaning the Dustbin

Step-by-step guide for removing, emptying, and cleaning the dustbin and its filters.

Driving Wheel Maintenance

Cleaning Driving Wheels

Procedure for cleaning the driving wheels of the Jet Bot to remove foreign matter.

Brush Maintenance

Cleaning the Main Brush

Detailed steps for removing, cleaning, and reattaching the main brush of the Jet Bot.

Sensor and Filter Cleaning

Cleaning Sensor Windows

Instructions on how to clean the various sensor windows on the Jet Bot for optimal performance.

Cleaning Fine Dust Filter

Guide on how to clean or replace the fine dust filter.

Clean Station Maintenance

Replacing the Dust Bag

Step-by-step process for replacing the dust bag in the Clean Station.

Cleaning Clean Station Filter

Instructions on how to clean the fine dust filter of the Clean Station.

SmartThings App Setup

Wireless Router Configuration

Guidelines for configuring your wireless router to ensure compatibility with the Jet Bot and SmartThings App.

SmartThings App Installation and Account

Downloading and Installing the App

Steps for downloading and installing the SmartThings App on your mobile device.

SAMSUNG Account Setup

How to create or sign in to a SAMSUNG account required for using the SmartThings App.

Registering Jet Bot to App

Process for connecting your Jet Bot to the SmartThings App and your smartphone.

SmartThings App Software Updates

Automatic Software Updates

Information on how the Jet Bot's software is updated automatically and how to identify update status.

SmartThings App Functions

Monitoring Features

Features for monitoring cleaning results, histories, and using the home monitoring camera.

Control Features

Functions for controlling the Jet Bot, including dock, pause, cleaning modes, suction, and cleaning functions.

SmartThings App Settings and Management

App Settings Customization

Customization options for sound, language, volume, obstacle detection, and downtime.

Map and Furniture Management

Features for editing, managing, and resetting the created cleaning maps and furniture recognition.

Notes and Cautions

Installation Notes

Key notes and precautions for installing the Clean Station and Jet Bot.

Charging Cautions

Important notes and troubleshooting tips for charging the Jet Bot, especially during auto charging.

Usage Notes and Tips

Using the Jet Bot Safely

Notes and cautions for using the Jet Bot, including potential issues with thresholds, dark areas, and cleaning effectiveness.

Detailed Cleaning and Maintenance

Cleaning and Maintenance Notes

Detailed notes and cautions for cleaning and maintaining the Jet Bot, filters, and dustbin.

Battery Usage Guidelines

Battery Handling and Care

Important guidelines and precautions for using, storing, and handling the Jet Bot's battery.

Troubleshooting Before Reporting

Corrective Measures Overview

Troubleshooting guide to identify and resolve common issues before contacting support.

Troubleshooting Common Issues

Jet Bot Not Working or Stopping

Steps to diagnose and fix issues when the Jet Bot is not working or stops mid-cleaning.

Suction Power and Station Finding

Troubleshooting for reduced suction power and issues with the Jet Bot finding its charging station.

Boundary Marker Detection

Checks for proper attachment and placement of boundary markers.

Advanced Troubleshooting

Navigation and Mapping Issues

Resolving issues with diagonal cleaning, missed spots, room finding, and map accuracy.

Empty Dust Function Issues

Troubleshooting for the automatic dust emptying function not performing as expected.

Function-Specific Troubleshooting

No-Go Zones and Intelligent Control

Ensuring No-go Zones work and troubleshooting Intelligent Power Control and Corner Clean.

Connection and Installation Troubleshooting

Troubleshooting App installation and connection issues between Jet Bot and smartphone.

SmartThings App Connectivity Troubleshooting

Account Login and Registration Issues

Resolving issues with SAMSUNG account login and product registration with wireless routers.

Wi-Fi and Smartphone Connection Problems

Steps to check and resolve Wi-Fi connection issues and smartphone responsiveness.

SmartThings App Operational Troubleshooting

Offline Messages and Map Saving

Resolving 'Offline' status messages and map saving issues in the SmartThings App.

Delayed Smartphone Response

Addressing delays in response when controlling the Jet Bot via a smartphone.

Open Source Announcement

Open Source Software Information

Information regarding open source software used in the product and how to access source code.

Factory Reset Procedure

Resetting to Factory Defaults

Instructions for resetting the Jet Bot to its original factory default settings.

Product Specifications

Jet Bot Technical Details

Detailed technical specifications for the VR50T95**** series Jet Bot, including dimensions and performance.

Clean Station Specifications

Clean Station Technical Details

Technical specifications for the Clean Station, including dimensions, power, and operating time.

Related product manuals

Samsung Jet Bot VR50T95735W/SA

48 pages

Samsung Jet Bot VR30T85 Series

47 pages

Samsung Jet Bot VR30T80 Series

76 pages

Samsung Jet Bot

192 pages

Samsung BESPOKE Jet VS20A9580

21 pages

BESPOKE Jet Cordless Stick Vacuum with All In One Clean Station VS20A95923