Samsung LH55MLE - Page 42

42
Chapter 3. PC software (Multiple Display Control)
Approving a connected device from the server
Approving the Lite server
Set MagicInfo Mode to Lite in Server Network Settings.
Approve and use the Lite server now.
First congure Server Network Settings before device approval.
1 Access the server you have assigned to your device.
2 Enter your ID and password to log in.
3 Select Device from the top menu bar.
4 Select Lite from the menus on the left.
5 Select Unapproved from the sub-menus of Lite.
6 Select the Approve button for your device from the list of unapproved Lite devices.
7 Enter the information required to approve the device.
 Device Name: Enter the device name.
 Device Group: Select to specify the group.
 Location: Enter the current location of the device.
 Pressing the
INFO
button on the remote when a network schedule is running
will display the details of the schedule. Check that the correct device has been
selected by viewing the device ID in the details.