English - 13
04 OVEN USE
1. Press the Clock button.
2. Turn the Multi Function Selector Dial to set
time display type. (12 H or 24 H)
3. Press the Multi Function Selector Dial to
complete the setup.
4. Turn the Multi Function Selector Dial to set
the hour.
5. Press the Multi Function Selector Dial.
6. Press the Multi Function Selector Dial to set
the minute.
7. When the right time is displayed, press the
Multi Function Selector Dial to start the clock.
Result: The time is displayed whenever
you are not using the microwave
oven.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven
unattended.
Open the door. Place the food in the centre of the turntable. Close
the door. Never switch the microwave oven on when it is empty.
1. Turn Mode Selector Dial to Microwave mode position.
Result: The following indications are
displayed:
(microwave mode)
2. Turn Multi Function Selector Dial to desired
until the appropriate power level is displayed.
At that time, press the Multi Function Selector
Dial to set the power level.
3. Set the cooking time by turning the Multi
Function Selector Dial.
Result: The cooking time is displayed.
4. Press the Start/ + 30s button.
Result: The oven light comes on and the
turntable starts rotating. Cooking
starts and when it has nished:
• The oven beep and ash “0” four times.
The oven will then beep one time per minute.
If you would like to know the current Power Level of the oven cavity,
press Multi Function Selector Dial once. If you would like to change
the power level during cooking, turn the Multi Function Selector Dial.
Quick Start:
If you wish to heat a dish for a short period of time at
maximum power (900 W), you can also simply press the Start/
+ 30s button once for each 30 seconds of cooking time. The
oven starts immediately.
To Next Page
Loading...
