Samsung MCM-D201N - IN;OUT Sensor Installation Examples

17
ENGLISH
Example of IN/OUT sensor installation 1
1. Chcek the sensor and sensor holder you will attach.
Clip for sensor xing
Insulator
Sensor holder
IN/OUT sensor
Type
Diameter of a
sensor (mm)
Diameter of a sensor
holder (mm)
IN sensor(Blue) ø 6 ø 6.8
OUT sensor(Red) ø 7 ø 7.8
NOTE
2. Attach the sensor holder to the selected location of a pipe.
Sensor holder
Pipe
Attaching a sensor
• Attach the sensor at the place where temperature
detection is easily available. (Refer to p.16)
• Attach the sensor holder as closely as possible on the
surface of the pipe.
• Check whether the sensor you will attach is IN or OUT
sensor. (The size of IN/OUT sensor is dierent.)
NOTE
3. Insert the sensor and the clip into the sensor holder.
IN/OUT sensor
Clip for sensor xing
4. Bend the clip to x it.
5. Attach the insulator around the attached sensor.
Insulator