Samsung MCM-D201N - Setting SEG16, SEG17 Option; Setting SEG18, SEG20 Option; Setting Heat Mode; Setting SEG23, SEG24 Mode

21
ENGLISH
Option setting Status
12. Setting Cool mode
Press
button to be change to Cool mode in the OFF status.
13. Setting SEG16, SEG17 option
Press Low Fan button(
) to enter SEG16 value.
Press High Fan button(
) to enter SEG17 value.
Each time you press the button,
p p … p will be selected in rotation.
SEG16 SEG17
14. Setting Dry mode
Press button to be change to Dry mode in the OFF status.
15. Setting SEG18, SEG20 option
Press Low Fan button(
) to enter SEG18 value.
Press High Fan button(
) to enter SEG20 value.
Each time you press the button,
p p … p will be selected in rotation.
SEG18 SEG20
16. Setting Fan mode
Press
button to be change to Fan mode in the OFF status.
17. Setting SEG21, SEG22 option
Press Low Fan button(
) to enter SEG21 value.
Press High Fan button(
) to enter SEG22 value.
Each time you press the button,
p p … p will be selected in rotation.
SEG21 SEG22
18. Setting Heat mode
Press
button to be change to HEAT mode in the OFF status.
19. Setting SEG23, SEG24 mode
Press Low Fan button(
) to enter SEG23 value.
Press High Fan button(
) to enter SEG24 value.
Each time you press the button,
p p … p will be selected in rotation.
SEG23 SEG24
Step 3. Checking the option you have set
After setting option, press
button to check whether the option code you have entered is correct or not.
→
→
→
→
→
→
→
→
→
Step 4. Entering an option
Press the operation button with the direction of a remote controller to set.
For the correct option setting, you must enter the option twice.
Step 5. Checking operation
1) Press the power reset button or the reset button of an outdoor unit to reset the settings.
2) Take the batteries out of the remote controller and insert them again and then press the
button.