9
ENGLISH
f For HP setting, refer to SEG20 of 05 series in installation option section. (Refer to p.26)
f Connect room temperature sensor and discharge temperature sensor(optional) as mA or PT1000 type.
- When using the mA type sensor, connect to the terminal block +/-(mA).
- When using the PT1000 sensor, connect to the terminal block A/B/C .
- Set the types of room temperature sensor and discharge temperature sensor in SEG24 of 05 series installation option.
The types of the sensors must be same.
No. CONNECTOR FUNCTION NOTE
1 CN83/84/85 EEV EEV 1/2/3
2 CN86 EEV EEV 4
3 REM01 REMOCON RECEIVER OPTION INPUT
4 CN82 EXTERNAL CHECK
1/3 PIN : COMP CHECK OUT
6/8 PIN : ERROR CHECK OUT
5 CN43 SENSOR
1/2 PIN : EVA IN
3/4 PIN : EVA OUT
6 CN21 DOWNLOAD S/W UPGRADE
7 CN201 EEPROM PBA
8 CN311 2WIRE SUB PBA
To Next Page
Loading...
