167
System
8
8 System
8.10.2 Timer
You can set the timer for Screen Burn Protection.
If you start the operation to erase any residual image, the operation will be performed for the set period of
time and then automatically finish.
z Mode: You can change the Safety Screen Type.
z Period: Use this function to set the execution period for each mode set in the timer.
z Time: Within the set period of time specify a time for execution.
8.10.3 Pixel
This function prevents after-images by moving many pixels on the screen.
8.10.4 Side Gray
Select the brightness of the grey for the screen background.
z Off / Light / Dark
To Next Page
Loading...
