70
3 Using MDC
3
Using MDC
MDC (Multiple Display Control) is an application that allows you to easily control multiple display
devices simultaneously using a PC.
3.1 Configuring Settings for Multi Control
MENU
[] System Multi Control ENTER
[ ]
Assign an individual ID to your product.
3.1.1 Configuring settings for Multi Control
z MDC Connection
Select a method to connect to MDC to receive the MDC signal.
RS232C MDC
Communicate with MDC via the RS232C-stereo cable.
RJ45 MDC
Communicate with MDC via the RJ45 cable.
z ID Setup
Assign an ID to a set. (Range: 0~99)
Press or to select a number, and press [ ].
z ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
m
To Next Page
Loading...
