27
Preparations
1
1 Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
[IR / AMBIENT SENSOR IN]
Supplies power to the external sensor board or receives the light
sensor signal
[IR OUT]
Receives the input signal via the external sensor board and outputs
the signal via LOOPOUT
[AUDIO OUT] Connects to the audio of a source device
[RGB / DVI / HDMI AUDIO IN] Receives sound from a PC via an audio cable
[USB ]
USB memory device port
[AV IN / COMPONENT IN] Connects to a source device using the AV/component adapter
[DP IN] Connects to a PC using a DP cable
[HDMI IN] Connects to a source device using an HDMI cable
[DVI OUT (LOOPOUT)] Connects to another product using a DVI cable
[DVI IN] Connects to a source device using a DVI cable or HDMI-DVI cable.
[ANT IN] Connect to an antenna cable.
[RGB IN] Connects to a source device using the D-SUB cable.
[RS232C IN / OUT] Connects to MDC using an RS232C-stereo cable
[RJ45] Connects to MDC using a LAN cable
To Next Page
Loading...
