Samsung ME32B

175
System
8
8 System
8.14 Anynet+ (HDMI-CEC)
MENU [] System Anynet+ (HDMI-CEC) ENTER [ ]
8.14.1 Anynet+ (HDMI-CEC)
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+
with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that
have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+
logo on it.
z You can only control Anynet+ devices using the product remote control, not the buttons on the
product.
z The product remote control may not work under certain conditions. If this occurs, reselect the
Anynet+ device.
z The Anynet+ functions do not operate with other manufacturers’ products.
z For instructions explaining how to connect Anynet+ external devices, refer to the device’s user
manual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not
support Anynet+ functions.
z Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
z While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display.
It does not work if the AV device is connected as a secondary display.
z Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the
same type.
z However, you can connect only one Anynet+ Home Theater. To connect an Anynet+ Home
Theate, connect the Home Theater to the product using an HDMI cable then.
m