Samsung ML-2150 - 3 USING THE CONTROL PANEL

5-4
Disassembly and Reassembly
Samsung Electronics
Service Manual
5.4 Holder Pad Ass’y
1. Before you remove the Holder Pad Ass'y, you should
remove:
- MPF Ass’y (Refer to the 5.3)
2. Unplug the connector and remove the two screws, as
shown below.
3. Remove the photo interrupter and the MP Actuator
as shown below.
Holder Pad Ass'y
MP Actuator
Photo
Interrupter
5.5 RH Cover
1. Pull the Cassette out of the printer.
2. Remove two screws and take out the RH Cover .
Cassette
RH Cover