Samsung ML-2150 - Engine Shield

5-24
Disassembly and Reassembly
Samsung Electronics
Service Manual
5.25 Engine Shield
1. Before you remove the Engine Shield, you should
remove:
- ICU Shield Refer to the 5.24)
2. Remove the Actuator as shown below.
Notice: Be careful not to get burnt when separat-
ing an Engine PBA.
3. Remove ten screws and slightly lift the Engine
Shield, as shown below.
4. Unplug all of the connectors from the Engine
Board. Then take out the Engine Shield Ass’y.
Actuator
1
2
Engine Shield