Samsung ML-2150 - Printing on Transparencies

6-19
Samsung Electronics
ALIGNMENT & ADJUSTMENTS
Service Manual
6.5 Periodic Defective Image
If the delinquent image regularly occurs in the printed-paper, it is due to delinquent or damaged roller.
Refer to the table in below and check the condition of the roller.
No Roller Defective image Typical defect
1 OPC Drum 95 mm white spot on black image or black spot
2 Charge Roller 38 mm black spot
3 Supply Roller 45 mm light or dark horizontal image band
4 Developing Roller 49 mm horizontal image band
5 Transfer Roller 57 mm image ghost
6 Heat Roller 82 mm Black spot and image ghost
7 Pressure Roller 92 mm black spot on the backside
솔레노이드솔레노이드
R1R11
R12R12
OPC Drum
Charge Roller
Supply Roller
Developing Roller
Transfer Roller
Heat Roller
Pressure Roller
Cleaning Roller
1
2
3
4
1
8
3
4
5
6
7
2
5
6
7
8
<Rollers Layout>