Samsung ML-2150 - Exit Roller

5-15
Samsung Electronics
Disassembly and Reassembly
Service Manual
5.18 Exit Roller
1. Before you remove the Exit Roller, you should
remove:
- Top Cover (Refer to the 5.13)
- Exit Drive (Refer to the 5.17)
2. Remove the Exit Roller and Bearing as shown
below.
3. Take out the Exit Gear as shown below.
4. Take out the Duplex Exit Roller as same
method of the code
Bearing
Exit Roller
Duplex Exit Roller
Exit Gear
Bearing