Samsung ML-2150 - Understanding the Control Panel

5-5
Samsung Electronics
Disassembly and Reassembly
Service Manual
5.6 Control Board
1. Before you remove the Control Board Ass'y, you
should remove:
- RH Cover (Refer to the 5.5)
2. Unplug the all connector, as shown below.
3. :The connectors are located as shown below.
4. Remove six screws and take out the Control
Board.
5. Remove four screws and take out the Control
Board Bracket.
NOTICE : One screw among the screws is locked
on the Engine Shield.(Refer to 5.25.3)
LSU
Exit
Motor
Catridge
Key Panel
DC Fan
Open Cover
DCU
Engine
PTL (REGI)
Maine Motor
Connector Board
Control Board
Control Board Bracket