Samsung ML-2150 - Open Cover; Inner Cover

5-11
Samsung Electronics
Disassembly and Reassembly
Service Manual
5.14 Open Cover
1. Before you remove the Open Cover, you should
remove:
- Top Cover (Refer to the 5.13)
2. Remove two screws and take out the Stopper.
3. Take out the Open Cover as shown below.
4. Release the lock as shown below and lift up the
Sensor Cap.
Stopper
Micro Switch PBA
Sensor Cap
Open Cover
5.15 Inner Cover
1. Before you remove the Inner Cover, you should
remove:
- MPF Ass/y (Refer to the 5.3)
- Top Cover (Refer to the 5.13)
2. Remove two screws and take out the Inner Cover.
Inner Cover