5-12
Disassembly and Reassembly
Samsung Electronics
Service Manual
5.16 Fuser Ass’y
1. Before you remove the Fuser Ass’y, you should
remove:
- Rear Cover Refer to the 5.12)
2.
Remove four screws and take out the Fuser
Ass’y.
3. Remove two screws and take the Thermostat
out of the Fuser Ass’y.
4. Remove one screw, and then take out the
Thermister from the Fuser Ass’y.
5. Remove two screws and take the Halogen
Lamp out of the Heat Roller.
6. Remove three screws and take out the Gear
bracket.
7. Remove two screws and divide the Fuser into
two parts.
To Next Page
Loading...
