5-18
Disassembly and Reassembly
Samsung Electronics
Service Manual
5.21 REGI Ass’y
1. Before you remove the REGI Ass’y, you should
remove:
- Top Cover (Refer to the 5.13)
2.
Unplug the Harness, Remove 3 screws.
3. Release the lock as shown below and lift up the
Gear Cap.
4. Take out the Regi. Ass’y as shown below.
5. Remove one screw and take out the Regi.
Sensor.
6. Unplug the Harness, remove one screw and
take out the PTL PBA.
To Next Page
Loading...
