Samsung MX-E850 - Listening a Radio; Selecting a Stored Station; Setting the Clock

12 English English 12
English 13
You can store up to:
15 FM stations, 15 AM stations (optional).
1. Select FM or AM by pressing the TUNER/AUX
button on the main unit.
You can select FM or AM by pressing the
FUNCTION button on the remote control.
2. To search for a station Press TUNING MODE button
Preset ................... Once or more times until PRESET
is displayed.
You can search the stored frequen-
cies in the Preset mode.
Manually .............. Once or more times until MANUAL
is displayed.
You can search the frequencies one
by one in the Manual mode.
3. Select the station to be stored by:
• Pressing theTUNING/ALBUM
,
or
.
button
ontheremotecontrolbuttontoselectthepreset
station.
or
TurntheEASY SEARCHING JOGcontrolleftor
righttosearchthestation.
• PressandholdtheTUNING/ALBUM
,
or
.
buttonontheremotecontroltoautomatically
searchforactivebroadcastingstations.
4. Press the MO/ST button to switch between stereo
and mono.
• In a poor receptionarea,selectMONOfora
clear,interference-freebroadcast.
• This app lies only when listening to an FM station. 
5. If you do not want to store the radio station found,
revert to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store any other radio frequencies required,
repeat Steps 3 to 4.
➣
In Tuner mode
• In the Manualmode,youcanuse
[
or
]

button
onthemainunittomanualsearcharadiostation.
• In the Presetmode,youcanuse
[
or
]
button
ortheEASY SEARCHING JOGcontrolonthe
mainunittosearchastoredradiostation.
You can listen to a stored radio station as following:
1. Select FM or AM by pressing the TUNER/AUX
button on the main unit.
You can select FM or AM by pressing the FUNC-
TION button on the remote control.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. Pres s [,] button on the main unit or TUNING/
ALBUM , , . on the remote control to select a
desired preset number.
or
Turn the EASY SEARCHING JOG control left or
right on the main unit to select the stored station.
Selecting a Stored StationListening a Radio
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
( ) button.
2. Press the TIMER SET button and then press the
ENTER ( ) button, "CLOCK" is displayed.
3. Press the ENTER ( ) button, the hour flashes.
• Increase the hours: ,
• Decrease the hours: .
4. When the correct hour is displayed, press the
ENTER ( ) button, the minutes flashes.
• Increase the minutes: ,
• Decrease the minutes: .
5. When the correct minute is displayed, press the
ENTER ( ) button, " TIMER" appears in the
display.
•
The current time is now set.
•
You can display the time, even when you are using
another function, by pressing the TIMER SET button
once.
•
You can also use
]
or
[
on the front panel instead
of TUNING/ALBUM , or . button in step 3,4.