Samsung MX-E850 - Timer Function; Cancelling the Timer

14 English
English 14
English 15
8. Press the ENTER ( ) button.
Result: CHECK REC (Do you want to record?) is dis-
played.
9. Press the ENTER ( ) button.
Result: RECORD N is displayed, you can press the
TUNING/ALBUM , or . button to select the
RECORD Y or RECORD N, and then press ENTER
button.
1)
If you select the RECORD N, it will cancel tuner
timing recording even if you have already set the
tuner timing recording.
2)
If you select the RECORD Y, you can set the tuner
timing recording.
a.
Press the ENTER ( ) button.
Result: ON TIME is displayed for a few seconds,
you can set the tuner timing recording switch-on
time.
b.
Press the ENTER ( ) button.
Result: OFF TIME is displayed for a few
seconds, you can set the tuner timing recording
switch-off time.
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, check that the current time
is correct.
• For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
• If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
Example: You wish to wake up to music every morning.
1. Switch the system on by pressing the POWER ( )
button.
2. Press the TIMER SET button until TIMER is
displayed.
3. Press the ENTER ( ) button.
Result: ON TIME is displayed for a few seconds, you
can set the timer switch-on time.
4. Set the timer switch-on time.
a Press the TUNING/ALBUM , or . button to
set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to
set the minutes.
d Press the ENTER ( ) button.
Result: OFF TIME is displayed for a few sec-
onds, you can now set the timer switch-
off time.
5. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to
set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to set
the minutes.
d Press the ENTER ( ) button.
Result: VOLUME XX is displayed, where XX cor-
responds to the volume already set.
6. Press th e TUNING/ALBUM , or . button to
adjust the volume level and press the ENTER ( )
button.
Result: The source to be selected is displayed.
7. Press th e TUNING/ALBUM , or . button to
select the desired source to be played when the
system switches on.
If you select... You must also...
FM/AM (radio) ......... a Press the ENTER ( ) button
b Select a preset station by
pressing the TUNING/
ALBUM , or . button.
CD/MP3 (compact disc) ...... Load one or more compact discs.
USB1/USB2 ............. Connect the USB device.
Timer Function
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you
no longer wish to use the timer, you must cancel it.
To... Press the TIMER ON/OFF button....
Cancel the timer ......... Once.
Result: is no longer dis-
played.
Restart the timer ........ Twice.
Result: is displayed again.
• When youselecttheTIMEROFFmode,theTIMER
RECORDINGandTIMEfunctionarenotavailable.
• The maximal tunertimingrecordingtimeis5hours.
• If the timer switchonandofftimesareidentical,the
wordERRORisdisplayed.
• You mayuse
]
,
[
buttonsonthemainunitto
insteadoftheTUNING/ALBUM
,
or
.
buttonto
adjustinstep4to9.
• If the switch-onor-offtimeisthesameasthetiming
recordingtime,onlytheswitch-onor-offtimeis
effective,andthetimingrecordingtimeisnotapplied.
• If th eautotimeristurnedon,theMP3/CDorUSB
functionmayrequireanadditionalsteptobe
activateddependingonthedisc(ordevice).Soitis
betterforyoutoselectthetunerfunctioninstead.
Cancelling the Timer