Samsung MX-E850 - Recording Function; Recording Speed

14 English English 14
English 15
Recording Function
You can record sound of the CD, the Radio Broad-
casting or sound from the external source into the
USB storage device.
1. Connect the external USB storage device you want
to record to the USB 2 ( ) on your
product.
2. Play a Disc, adjust the Radio frequency or connect
the external source to your product.
CD
• Press
theMP3/CDonthemainunittoselecttheCD
function.
• Press
theOPEN/CLOSE buttontoopenthedisctray.
• Insert
aCDandpresstheOPEN/CLOSE buttonto
closethedisctray.
• Use t
heCDselection(
[
or
]

)buttonstoselectthe
desiredsong.
Tuner
• SelectTUNERbypressingtheTUNER/AUXbutton
onthemainunit.
• AdjusttheRadiofrequencyyouwanttorecord.
External Source
• Conn
ectanExternalComponent/MP3playertoyour
product.
• Pres
stheTUNER/AUXbuttontoselect<AUX>input.
• Pla
yasongfromtheexternaldevice.
USB 1
• Conn
ectanUSBtoUSB1jackofyourproduct.
• Pres
stheUSB 1buttontoselectUSB1.
• Pla
yasongfromtheUSB1.
3. Press the USB REC button on the remote control or the
USB 2 REC button on the main unit to start recording.
CD
• “TRACK RECORDING” is displayedandCD
recording starts.
• Press and hold the USB REC button on the remote
control or press and hold the USB 2 REC button on
the main unit
tostartrecordingthealltracksofDisc.
"FULLCDRECORDING"isdisplayed.
• If you playtheMP3/WMAle,theleiscopiedintothe
USBdevicetotally.
“CHECK FILE”“COPY XX”“COPY END” is dis-
played.
When the recording is done, “STOP” will be displayed.
• If thereisthesamelename,"FILEEXIST"is
displayed,andthefunctioniscanceled.
Tuner /External Source
• RECORDING is displayed
.
4. To stop recording, press the STOP (@) button and
then automatically create and save as the MP3 file.
5. To rem ove the USB device safely, press the STOP (@)
button once again. After the recording, a directory
named “RECORDING”(CD), “CD COPY”(MP3 CD),
“TUNER RECORDING” or “AUX RECORDING” will be
created in your device.
• Do not disconnect the USB or the AC Cord during the
recording as this may cause file damage.
• If you disconnected USB device during the recording,
the main unit will be power off and you may not delete
the recorded file, In this case, please connect the USB
device to the PC and backup the USB data on the PC
first and then format the USB device.
• When the USB memory is not enough, it will be displayed
“NOT ENOUGH MEMORY”.
• The recording works if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system is
not supported.)
• When you use CD high speed search function, the CD
recording can’t work.
• Sometimes, the recording time may be longer with some
USB devices.
• In the program mode, you can't use the CD recording
function.
• When the CD recording, the EQ and GIGA SOUND
functions can not work and automatically change to OFF.
• When the CD recording, the REPEAT function can not
work and automatically changes to OFF.
• If you use the MIC function during the CD recording, the
voice from the microphone will be recorded.
• You can not record the radio when searching or no
available frequencies in the Tuner mode.
• Note that setting the input level too loud when recording
music from an external device through the AUX and USB
channel may introduce noise into the recording. In that
case, lower the external device’s volume level.
Recording Speed
You can select the recording speed before recording.
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as following:
RECORD SPD x 1
;
RECORD SPD x 4
• While the TunerorExternalSourceisrecording,the
recordingspeeddoesnotsupported.
• Whe nyouselectRECORD SPD x 4,theaudiosoundwill
notbeoutput.
• If you connected the Microphone, you just have one recording
speed mode: RECORD SPD x 1.
• During recording, if you disconnect the Microphone, the
recording will stop, even if you reconnect the Microphone, it
will still stop.