Why is my Samsung NE58K9500SG Ranges not baking or roasting food properly?
If food isn't baking or roasting properly in your Samsung Ranges, the oven controls may not be set correctly. Also, check that the oven rack is positioned correctly and is level. If problems persist, the oven sensor may need adjustment.
Why is my Samsung NE58K9500SG Ranges smoking excessively during self-cleaning?
If there's excessive smoking during a self-cleaning cycle of your Samsung Ranges, press Oven Off. Open the windows to vent the smoke. After the cycle cancels, wipe up the excessive soil and reset the oven for self-cleaning.
What to do if my Samsung NE58K9500SG oven control beeps and displays an error code?
If your Samsung Ranges oven control is beeping and showing an error code, first press 'Oven Off' and restart the oven. If the problem continues, disconnect power to the range for at least 30 seconds, then reconnect it. If the issue persists after these steps, call for service.
How to reduce smoke when broiling with a Samsung Ranges oven?
Excessive smoke during broiling in your Samsung Ranges oven can be addressed by ensuring the oven controls are properly set and the oven door is opened to the broil stop position. Repositioning the rack to increase space between the meat and the element, preheating the broil element, removing excess fat from the meat, and regularly cleaning grease buildup on oven surfaces can also help.
What to do if the oven door won't open after self-cleaning on my Samsung Ranges?
If the oven door of your Samsung Ranges won't open after a self-cleaning cycle, allow the oven to cool.
Why doesn't food broil properly in my Samsung Ranges?
If food isn't broiling correctly in your Samsung Ranges, first ensure the oven controls are correctly set by pressing BROIL. Also, ensure the rack is properly positioned and that you're using suitable cookware. In areas with low voltage, preheat the broil element for 10 minutes.
Why does the display go blank on my Samsung Ranges?
If the display on your Samsung Ranges goes blank, check the fuse in your home and the circuit breaker. Replace the fuse or reset the circuit breaker if necessary.
What to do if Samsung NE58K9500SG oven control beeps and displays an error code?
If your Samsung Ranges oven control beeps and displays an error code, press Oven Off and restart the oven. If the problem continues, disconnect power to the range for at least 30 seconds, then reconnect. If the issue persists after these steps, call for service.
What to do if the surface units will not turn on in my Samsung NE58K9500SG?
If the surface units on your Samsung Ranges won't turn on, check whether a fuse in your home has blown or the circuit breaker has tripped; if so, replace the fuse or reset the circuit breaker. Also, ensure the cooktop controls are correctly set for the surface unit you're using.
What to do if my Samsung Ranges appliance will not turn on?
If your Samsung Ranges appliance isn't turning on, verify that it's properly plugged into a grounded outlet and check the fuse and circuit breakers. If those are fine, call for service, as there might be incomplete service wiring. Also, check for a power outage.
General| Fuel Type | Electric |
|---|---|
| Oven Capacity | 5.8 cu. ft. |
| Cooktop Type | Induction |
| Cooktop Surface | Glass |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Wi-Fi Connectivity | Yes |
| Color | Black Stainless Steel |
| Width | 29.875 inches |
Warnings about the risks of tipping the range if the anti-tip device is not properly installed or engaged.
Explains the meaning of various icons and symbols used throughout the manual for safety warnings.
Emphasizes the need for adult supervision and keeping children away from the appliance.
Stresses the importance of installation by qualified technicians and proper grounding.
Mandates installation by a qualified technician to prevent electric shock, fire, or injury.
Details on safe electrical plug insertion, grounding, and avoiding damaged cords.
Emphasizes following all installation instructions to prevent hazards.
Specifies required clearances for cutouts and cabinet temperature resistance.
Specifies voltage, frequency, grounding, and recommends qualified electricians.
Step-by-step guide for connecting a 3-wire power cord to the terminal block.
Crucial safety step to prevent tipping; instructions for bracket installation.
Detailed description of each button and its function on the control panel.
How to properly insert the probe and its use for cooking meat to desired temperatures.
Explains the self-cleaning process and safety precautions during the cycle.
Explains common error codes and how to resolve them.
To Next Page