What to do if the surface units will not turn on in my Samsung NE58K9500SG?
If the surface units on your Samsung Ranges won't turn on, check whether a fuse in your home has blown or the circuit breaker has tripped; if so, replace the fuse or reset the circuit breaker. Also, ensure the cooktop controls are correctly set for the surface unit you're using.
What to do if my Samsung Ranges appliance will not turn on?
If your Samsung Ranges appliance isn't turning on, verify that it's properly plugged into a grounded outlet and check the fuse and circuit breakers. If those are fine, call for service, as there might be incomplete service wiring. Also, check for a power outage.
Why won't my Samsung Ranges oven turn on?
Your Samsung Ranges oven might not turn on due to several reasons. First, ensure the range is fully plugged into a working, grounded electrical outlet. A blown fuse or tripped circuit breaker could also be the cause, so check and replace the fuse or reset the breaker. Improperly set oven controls or an overheated oven may also prevent it from turning on. In the latter case, allow the oven to cool.
General| Fuel Type | Electric |
|---|---|
| Oven Capacity | 5.8 cu. ft. |
| Cooktop Type | Induction |
| Cooktop Surface | Glass |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Wi-Fi Connectivity | Yes |
| Color | Black Stainless Steel |
| Width | 29.875 inches |
Warnings about the risks of tipping the range if the anti-tip device is not properly installed or engaged.
Explains the meaning of various icons and symbols used throughout the manual for safety warnings.
Emphasizes the need for adult supervision and keeping children away from the appliance.
Stresses the importance of installation by qualified technicians and proper grounding.
Mandates installation by a qualified technician to prevent electric shock, fire, or injury.
Details on safe electrical plug insertion, grounding, and avoiding damaged cords.
Emphasizes following all installation instructions to prevent hazards.
Specifies required clearances for cutouts and cabinet temperature resistance.
Specifies voltage, frequency, grounding, and recommends qualified electricians.
Step-by-step guide for connecting a 3-wire power cord to the terminal block.
Crucial safety step to prevent tipping; instructions for bracket installation.
Detailed description of each button and its function on the control panel.
How to properly insert the probe and its use for cooking meat to desired temperatures.
Explains the self-cleaning process and safety precautions during the cycle.
Explains common error codes and how to resolve them.
To Next Page