Why doesn't food bake or roast properly in my Samsung NE58K9500SG?
If food isn't baking or roasting properly in your Samsung Ranges, it could be due to incorrect oven control settings. Also, check that the oven rack is positioned correctly and is level. The oven sensor may also need adjustment.
Why is the oven temperature too hot or cold in my Samsung Ranges?
If the oven temperature in your Samsung Ranges is consistently too hot or too cold, the oven sensor may need adjustment.
Why is my Samsung NE58K9500SG Ranges not baking or roasting food properly?
If food isn't baking or roasting properly in your Samsung Ranges, the oven controls may not be set correctly. Also, check that the oven rack is positioned correctly and is level. If problems persist, the oven sensor may need adjustment.
Why won't the surface units maintain a rolling boil on my Samsung NE58K9500SG?
If the surface units on your Samsung Ranges aren't maintaining a rolling boil or cooking fast enough, ensure you're using flat pans that match the diameter of the surface unit. If the power (voltage) in your area is low, cover the pan with a lid to help retain heat until the desired temperature is reached.
What to do if my Samsung NE58K9500SG oven control beeps and displays an error code?
If your Samsung Ranges oven control is beeping and showing an error code, first press 'Oven Off' and restart the oven. If the problem continues, disconnect power to the range for at least 30 seconds, then reconnect it. If the issue persists after these steps, call for service.
What to do if the surface units will not turn on on my Samsung Ranges?
If the surface units on your Samsung Ranges won't turn on, start by checking the fuse or circuit breaker in your home and replace the fuse or reset the breaker if necessary. Also, make sure the cooktop controls are correctly set for the specific surface unit you're trying to use.
What to do if my Samsung NE58K9500SG oven won't self-clean?
If your Samsung Ranges oven will not self-clean, allow the range to cool and reset the controls.
What to do if Samsung NE58K9500SG Ranges surface units won't maintain a rolling boil?
If the surface units on your Samsung Ranges aren't maintaining a rolling boil or cooking fast enough, make sure you're using flat pans that match the diameter of the surface unit. If the power (voltage) is low in your area, cover the pan with a lid until the desired heat is obtained.
Why does the display go blank on my Samsung Ranges?
If the display on your Samsung Ranges goes blank, check the fuse in your home and the circuit breaker. Replace the fuse or reset the circuit breaker if necessary.
What to do if Samsung NE58K9500SG oven control beeps and displays an error code?
If your Samsung Ranges oven control beeps and displays an error code, press Oven Off and restart the oven. If the problem continues, disconnect power to the range for at least 30 seconds, then reconnect. If the issue persists after these steps, call for service.
General| Fuel Type | Electric |
|---|---|
| Oven Capacity | 5.8 cu. ft. |
| Cooktop Type | Induction |
| Cooktop Surface | Glass |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Wi-Fi Connectivity | Yes |
| Color | Black Stainless Steel |
| Width | 29.875 inches |
Warnings about the risks of tipping the range if the anti-tip device is not properly installed or engaged.
Explains the meaning of various icons and symbols used throughout the manual for safety warnings.
Emphasizes the need for adult supervision and keeping children away from the appliance.
Stresses the importance of installation by qualified technicians and proper grounding.
Mandates installation by a qualified technician to prevent electric shock, fire, or injury.
Details on safe electrical plug insertion, grounding, and avoiding damaged cords.
Emphasizes following all installation instructions to prevent hazards.
Specifies required clearances for cutouts and cabinet temperature resistance.
Specifies voltage, frequency, grounding, and recommends qualified electricians.
Step-by-step guide for connecting a 3-wire power cord to the terminal block.
Crucial safety step to prevent tipping; instructions for bracket installation.
Detailed description of each button and its function on the control panel.
How to properly insert the probe and its use for cooking meat to desired temperatures.
Explains the self-cleaning process and safety precautions during the cycle.
Explains common error codes and how to resolve them.
To Next Page