Samsung NX100 - Charge and Insert the Battery

Charge and insert the battery
g.~~rge the battery
Before using the camera for the first time, you must
fully charge the battery.
1 Insert the battery in the battery cradle.
~
f~>/~ .. ~V . ./,:J
\'-" --...... . .. yc;:,.//'
'~-. '---. . e;/
~._-. __ ... ;
~/
• To remove the battery from the battery
cradle, gently lift the side of the battery
opposite
the indicator light.
• For safety, use only supported batteries.
Samsung is not responsible for accidents
caused
by using other manufacturer's
products.
12
2 Attach the AC cable to the battery cradle
and then
plug the other end of the cable
into a
power outlet.
Indicator light
• Red: Charging
•
Green: Fully charged
•
Off or Orange: Error