Samsung NX100 - Use Optical Image Stabilization (OIS)

Use Optical Image
Stabilization (DIS)
PAS M.ii (GJ p. 74
---~
If your lens has an OIS switch, you can use the OIS
function to minimize camera shake and take clear
shots.
Set the OIS switch to ON.
SAMSUNG 18-55 mm F3.5-5.6 OIS lens
(example)
In Shooting mode, press [MENU].
Select @ or e ~ DIS.
Select an option.
60
Icon
Description
Mode 1: The OIS function is applied only
when you half- or fully press [Shutter].
Mode 2: The OIS function is always on.
• OIS may not function properly when:
- You move your camera to follow a moving
subject.
-
The camera is not stable enough.
- The shutter speed is slow. (e.g., when you
select Night in the SCENE mode)
- The battery is low.
- You take a close-up shot.
• If you use the OIS function with a tripod, your
images may be blurred by the vibration of the
018 sensor. Deactivate the OIS function when
you usea tripod.
•
If the camera is subjected to impact, the
display will become blurry. In this case, turn off
the camera and turn it on again to use the OIS
function correctly.
• Using the OIS function only when necessary is
recommended, as it consumes more battery
power.
• If you want to set options regarding the OIS
function on the menu, turn the OIS switch
of the lens
first to ON. This function may not
operate depending on lens type.
• You can also set this function by pressing [Fn]
in Shooting mode.