69
Shooting Functions
In order to take a realistic photo of a subject, the amount of light should
be constant. When the light source varies, you can use an optional
flash and supply a constant amount of light. Select appropriate settings
according to a light source and a subject.
To set flash
options,
In Shooting mode, press [m]
2
Flash
an option.
Flash options
Option Description
Smart Flash: The camera automatically adjusts the brightness
of the flash according to the amount of light in the surrounding
environment.
Fill in: The flash fires whenever you take a photo.
Fill-in Red: The flash fires whenever you take a photo and
prevents red-eyes.
1st Curtain: The flash fires
immediately after the shutter
opens. The camera captures a
photo of a subject earlier in an
action sequence clearly.
Ball moving direction
Flash
Option Description
2nd Curtain: The flash fires just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
Ball moving direction
•
The options may differ depending on the shooting mode.
•
There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
•
You can use the flash and adjust the amount of light only when you use the
NX exclusive external flash.
Use only Samsung-approved flashes. Using incompatible flashes may
damage your camera.
To Next Page
Loading...
