Samsung NX100 - Measure the Exposure Value of the Focus; Set the Smart Range

Measure the exposure value
of the focus
PASM G p. 71
When this function is turned on, the camera
automatically
sets an optimal exposure by
calculating the brightness of the focus area. This
function is only available when you select either
Spot metering or Multi metering, and Selection AF.
1 In Shooting mode, press [MENU].
2 Select @3 ~ Link AE to AF Point.
3 Select On or Off.
Set the Smart range
PASM G p. 73
This function automatically corrects the loss
of bright detail that can occur due to shading
differences in the photo. When this function is
activated, the minimum ISO sensitivity is set as
ISO 200.
1 In Shooting mode, press [MENU].
2 Select @3 ~ Smart Range.
3 Select On or Off.
~ • Thecan:era ~mactivate the Smart range '
~ , automatically In some Smart Auto m.odes .
. ', .. ,. Y9ucan also set this ~nction by pressing .
. , [Fn} in Shooting mode.'
53