Samsung NX100 - Page 72

<m Setting 3
* Default
* Default
Select the resolution of photos when
playing files
on an output device
HDMI
Size" connected via an HOMI cable.
• NTSC: Auto*, 1080i, 720p, 480p
.• PAL: Auto*, 1080i, 720p, 576p
. •
Body Firmware: View camera
information.
•
Lens Firmware: View lens
information.
Item
Sensor
Gleaning
Video Out
Anynet+
(HDMI-
GEG)
72
"Description
•
Sensor Cleaning: Operate the
" sensor cleaner now.
••
Start-Up Action: Operate the
sensor cleaner every time you turn
on the camera. (Off*, On)
Set the video signal output
· according to your region.
"• NTSC*:
USA, Canada, Japan,
Korea,
Taiwan, Mexico.
•• PAL: Australia, Austria, Belgium,
China, Denmark, Finland,
Germany, England,
Italy,
Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden,
Switzerland, Thailand, Norway.
Set to control the camera
via a 1\1
remote control (when connected to
a
1\1 that supports Anynet+ [HOMI-
·
CEC]). (Off, On*)
Item
Firmware
Update
Description
• You can download firmware
upgrades from
www.samsung.com or
www.samsungimaging.com.
•
You cannot run a firmware
upgrade without a fully charged
the battery. Recharge the battery
fully before running a firmware
upgrade or attach the adapter to
provide power (optional).
•
If you update the firmware, user
settings values
will be reset.
(Date, time, language, video out
will not change.)
• Do not turn the camera off while
the update
is in progress.