System Management 91
Using the Battery
Please refer to the following instructions when running the computer on battery power
without connecting the AC power.
Please read the instructions on the battery before use.
Please refer to the system operation environment (p130) of this manual and
operate and store the battery at room temperature.
Ejecting and Attaching Battery
1. Shutdown the system and close LCD.
2. Put the computer upside down on a flat surface.
3. Pull the two battery latches outward, then remove the battery.
In X10 Plus model, slide left battery latch outward, then remove the battery
while holding the right battery latch outward.
To Next Page
Loading...
